SLN-OLV200 Olive Oil Machine Midi
The increase of agro-business across the globe has sometimes negative effects on humans. Agricultural products produced fast and in high capacity may become an unhealthy, unnatural product.
As SELNI MACHINE, we decided to produce a machine that is environment-friendly and in accord with the organic agriculture sector standards for our world where organic agriculture becomes more and more widespread. As you know, boutique olive oil production has a limited quantity in terms of production as a result of intensive labor. The quality and natural formations are in direct proportion with the production labor performed. The machine that we produced enables oil to protect its quality by processing the olive with cold press technique.
Why SLN-OLV200 Olive Oil Machine?
• Oil production in small area with reduced machine sizes,
• Keeping the smell of olive in oil due to the cold press performance of the system,
• Obtaining more quality oil by crushing olives daily,
• High oil production and obtaining perfect, quality oil with the help of many setting possibilities when used correctly,
• Being able to obtain your own oil and put on market with your own brand,
• More income with quality oil,
• The chance of residue to be used by the manufacturer (as a fuel, etc.),
• Having the necessary conditions for organic oil production,
• Causing no harm to the environment and the exemption from the various documents and projects by imposed by the Ministry of Environment on oil production.
Operation with SLN-OLV200:
Washing and Leaf Cleaning
There is a need to wash the olives and to pick over the leaves in the olives before the process of cracking and crushing of (if necessary). This process can be done with a suitable machine which can remove olive leaves, small branch spalls and wash the olives with water. SELNI MACHINE designed the Olive Washing and Leaf Aspirator Unit to be used in this process. At the same time, this machine transmits the olives to oil crusher section with transmission units.
Oil extraction from olive is performed in 3 phases (stages).
Olive crushing process is carried out by the hammer mill on the machine. This technique is used to obtain the best paste. Crushing is performed by circular blades at high speed (3000 rpm). The blades crumble the olives in a very short time and force them to pass through the small holes around them. The paste obtained in this way (passing through the small holes) is directed to malaxing process.
The malaxing process of olive paste is performed by mixing the paste coming from the hammer mill for 45 minutes. The miniolive has a closed system vertical nitrogen gas inlet and mixing unit. Thanks to being closed and suitable for nitrogen gas blast of this unit, the air contact with the olive paste is minimized and the oxidation of the oil and hence the increase of the peroxide is prevented (increase of the acidity of the olive oil). A heating system is provided on the malaxing unit (25-28 ° C max) to facilitate separation of oil from the olive paste. This system is recommended to be used in case that the oil separation is difficult due to the olive type of which oil is extracted.
SEPARATING (Separation of Oil and Residue-water)
Obtaining oil from the paste-formed olive is performed in the decanter. In the decanter, the plant sap-residue and oil are separated from each other. The principle of separation is based on the principle of centrifugal force. The high rotational speed of the unit (3200-4200 rpm) causes the formation of three different layers within the unit. The first outer layer is composed of residue, the second layer is composed of plant sap, and the third layer is composed of oil.
Storage of Oil Obtained
The olive oil taken from the decanter can be delivered directly to the resting tank to be rested for a few days in the tank. 50-70 lt oil reservoir can be added to the olive oil outlet of the machine. In addition, the filter machine with cotton filter element can also be adapted. In the resting tank, olive oil is rested by precipitating the particles formed in olive oil. After this process, it is recommended to filter the plant sap and sediment to prevent prolonged contact.
• Filter with cotton element made of stainless steel
It has two outlets, as oil outlet and water-residue outlet. A plate is placed under the separation unit with different holes for oil intake. The selected hole is kept open and the other holes are kept closed. In the decanter, the amount of paste input to be processed can be adjusted at variable speeds without stopping the machine. Water must be added to the olive paste to perform a good separation (max 10%) in some cases (especially for very dry olives).
The possibility of three setting options is foreseen;
• Adjusting the amount of olive paste penetrating the decanter for processing (variable rate loading without stopping the machine)
• Amount of water added in the decanter (Performed by flux meter without stopping the machine)
• Adjusting the depth of the outlet nozzle used for oil intake or adjusting the appropriate outlet hole
With these simple settings, SLN-OLV200 is able to extract all kinds of olive oil by adjusting it with a flux meter without stopping the extraction process regardless of maturity.
These processes are carried out no sooner than harvesting the olives to reach the highest point in the required oil quality, output quality and quantity. Limited use of water (max. 10%) and low temperature (26-28 ° C max.) reached during the process provides the most desirable high quality product in the world markets. SLN-OLV200 provides this quality product in smaller sizes. In addition, it enables the olive oil extraction machine to be cleaned quickly, easily and effectively owing to stainless steel material.
SLN-OLV200 Boutique Olive Oil Machine - TECHNICAL SPECIFICATIONS
Power Requirement : 380v - 50 HZ
Weight : 565 Kg
Dimensions (W x L x H) : 100 x 182 x 175 cm
Power Consumption : 5,5 kW/hour
Capacity : 200 kg/hour